mod_perl logo perl icon
previous page: Workarounds for some known bugs in browsers.page up: Tutorialsno next page

Web Content Compression FAQ






Embedding Perl in HTML with Mason

Embedding Perl in HTML with Mason

By Dave Rolsky, Ken Williams
mod_perl2 User's Guide

mod_perl2 User's Guide

By Stas Bekman, Jim Brandt
Practical mod_perl

Practical mod_perl

By Stas Bekman, Eric Cholet
The mod_perl Developer's Cookbook

The mod_perl Developer's Cookbook

By Geoffrey Young, Paul Lindner, Randy Kobes
mod_perl Pocket Reference

mod_perl Pocket Reference

By Andrew Ford
Writing Apache Modules with Perl and C

Writing Apache Modules with Perl and C

By Lincoln Stein, Doug MacEachern


Table of Contents

Description

Everything you wanted to know about web content compression



TOP

Basics of Content Compression

Compression of outbound Web server traffic provides benefits both for Web clients who see shorter response times, as well as for content providers, who experience lower consumption of bandwidth.

Most recently, content compression for web servers has been provided mainly through use of the gzip encoding. Other (non perl) modules are available that provide so-called deflate compression. Both approaches are very similar recently and use the LZ77 algorithm combined with Huffman coding. Luckily for us, to make use of them, there is no real need for most of us to understand all the details of the obscure underlying mathematics of these techniques. Apache handlers available from CPAN can usually do the dirty work. Apache addresses content compression through handlers configured in its configuration file.

Compression is, by its nature, a content filter: It always takes its input as plain ASCII data that it converts to another binary form, and outputs the result to some destination. That is why every content compression handler usually belongs to a particular chain of handlers within the content generation phase of the request-processing flow.

A chain of handlers is one more common term that is good to know about when you plan to compress data. There are two of them recently developed for Apache 1.3: Apache::OutputChain and Apache::Filter. We have to keep in mind that the compression handler developed for one chain usually fails inside another.

Another important point deals with the order of execution of handlers in a particular chain. It's pretty straightforward in Apache::Filter. For example, when you configure...

  PerlModule Apache::Filter
  <Files ~ "*\.blah">
    SetHandler perl-script
    PerlSetVar Filter On
    PerlHandler Filter1 Filter2 Filter3
  </Files>

...the content will go through Filter1 first, then the result will be filtered by Filter2, and finally Filter3 will be invoked to make the final changes in outbound data.

However, when you configure Apache::OutputChain like...

  PerlModule Apache::OutputChain 
  PerlModule Apache::GzipChain 
  PerlModule Apache::SSIChain 
  PerlModule Apache::PassHtml 
  <Files *.html>
  SetHandler perl-script
    PerlHandler Apache::OutputChain Apache::GzipChain Apache::SSIChain Apache::PassHtml
  </Files>

...execution begins with Apache::PassHtml. Then the content will be processed with Apache::SSIChain and finally with Apache::GzipChain. Apache::OutputChain will not be involved in content processing at all. It is there only for the purpose of joining other handlers within the chain.

It is important to remember that the content compression handler should always be the last executable handler in any chain.

Another important problem of practical implementation of web content compression deals with the fact that some buggy Web clients declare the ability to receive and decompress gzipped data in their HTTP requests, but fail to keep their promises when an actual compressed response arrives. This problem is addressed through the implementation of the Apache::CompressClientFixup handler. This handler serves the fixup phase of the request-processing flow. It is compatible with all known compression handlers and is available from CPAN.



TOP

Why it is important to compress Web content?



TOP

Reduced equipment costs and the competitive advantage of dramatically faster page loads.

Web content compression noticeably increases delivery speed to clients and may allow providers to serve higher content volumes without increasing hardware expenditures. It visibly reduces actual content download time, a benefit most apparent to users of dialup and high-traffic connections.

Industry leaders like Yahoo and Google are widely using content compression in their businesses.



TOP

How much improvement can I expect?



TOP

Effective compression can achieve increases in transmission efficiency from 3 to 20 times.

The compression ratio is highly content-dependent. For example, if the compression algorithm is able to detect repeated patterns of characters, compression will be greater than if no such patterns exist. You can usually expect to realize an improvement between of 3 to 20 times on regular HTML, JavaScript, and other ASCII content. I have seen peak HTML file compression improvements in excess of more than 200 times, but such occurrences are infrequent. On the other hand I have never seen ratios of less than 2.5 times on text/HTML files. Image files normally employ their own compression techniques that reduce the advantage of further compression.

On May 21, 2002 Peter J. Cranstone wrote to the mod_gzip@lists.over.net mailing list:

"...With 98% of the world on a dial up modem, all they care about is how long it takes to download a page. It doesn't matter if it consumes a few more CPU cycles if the customer is happy. It's cheaper to buy a newer faster box, than it is to acquire new customers."



TOP

How hard is it to implement content compression on an existing site?



TOP

Implementing content compression on an existing site typically involves no more than installing and configuring an appropriate Apache handler on the Web server.

This approach works in most of the cases I have seen. In some special cases you will need to take extra care with respect to the global architecture of your Web application, but such cases may generally be readily addressed through various techniques. To date I have found no fundamental barriers to practical implementation of Web content compression.



TOP

Does compression work with standard Web browsers?



TOP

Yes. No client side changes or settings are required.

All modern browser makers claim to be able to handle compressed content and are able to decompress it on the fly, transparent to the user. There are some known bugs in some old browsers, but these can be taken into account through appropriate configuration of the Web server.

I strongly recommend use of the Apache::CompressClientFixup handler in your server configuration in order to prevent compression for known buggy clients.



TOP

Is it possible to combine the content compression with data encryption?



TOP

Yes. Compressed content can be encrypted and securely transmitted over SSL.

On the client side, the browser transparently unencrypts and uncompresses the content for the user. It is important to maintain the correct order of operations on server side to keep the transaction secure. You must compress the content first and then apply an encryption mechanism. This is the only order of operations current browsers support.



TOP

What software is required on the server side for content compression?



TOP

There are four known mod_perl modules/packages for Web content compression available to date for Apache 1.3 (in alphabetical order):



TOP

What is the typical overhead in terms of CPU use for the content compression?



TOP

Typical CPU overhead that originates from content compression is insignificant.

In my observations of data compression of files of up to 200K it takes less then 60 ms CPU on a P4 3 GHz processor. I could not measure the lower boundary reliably for dynamic compression, because there are no really measurable latency. From the perspective of global architecture and scalability planning, I would suggest allowing some 10 ms per request on regular Web pages in order to roughly estimate/predict the performance of the application server.

Estimation of connection times is an even less exact matter for of a variety of possible network-related reasons. The worst-case scenario is pretty impressive: a slow dialup connection through an ISP with no proxy/buffering holds the provider's socket for a time interval proportionate to the size of the requested file. At present, gzip reduces this connection time by a factor of approximately 3-20. If the ISP buffers its traffic, however, the content provider might not feel a dramatic impact -- apart of the fact that they are paying their telecom providers for the transmission of considerable unnecessary data.



TOP

Is it possible to compress the output from Apache::Registry with Apache::Dynagzip?



TOP

Yes. This should be fairly easy to accomplish, as follows:

If your page/application is initially configured like this:

  <Directory /path/to/subdirectory>
    SetHandler perl-script
    PerlHandler Apache::Registry
    PerlSendHeader On
    Options +ExecCGI
  </Directory>

you might replace it with the following:

  PerlModule Apache::Filter
  PerlModule Apache::Dynagzip
  PerlModule Apache::CompressClientFixup
  <Directory /path/to/subdirectory>
    SetHandler perl-script
    PerlHandler Apache::RegistryFilter Apache::Dynagzip
    PerlSendHeader On
    Options +ExecCGI
    PerlSetVar Filter On
    PerlFixupHandler Apache::CompressClientFixup
    PerlSetVar LightCompression On
  </Directory>

You should usually be all set after that.

In more common cases, you will need to replace the line:

    PerlHandler Apache::Registry

in your initial configuration file with the following lines:

    PerlHandler Apache::RegistryFilter Apache::Dynagzip
    PerlSetVar Filter On
    PerlFixupHandler Apache::CompressClientFixup

Optionally, you might add:

    PerlSetVar LightCompression On

to reduce the size of the stream for clients unable to speak gzip (like Microsoft Internet Explorer over HTTP/1.0).

Finally, make sure you have somewhere declared

  PerlModule Apache::Filter
  PerlModule Apache::Dynagzip
  PerlModule Apache::CompressClientFixup

This basic configuration uses many defaults. See Apache::Dynagzip POD for further fine tuning if required.

Note, however, that Apache::RegistryFilter is not yet another Apache::Registry. You may need to adjust your script in accordance with requirements of Apache::Filer first, especially when the script generates any CGI/1.1-specific HTTP headers. You can test your compatibility with the Apache::Filter chain using a temporary configuration like:

  PerlModule Apache::Filter
  <Directory /path/to/subdirectory>
    SetHandler perl-script
    PerlHandler Apache::RegistryFilter
    PerlSendHeader On
    Options +ExecCGI
    PerlSetVar Filter On
  </Directory>

with no Apache::Dynagzip involved. See Apache::Filter documentation if you have any problems.



TOP

Is it possible to compress output from a Mason-driven application with Apache::Dynagzip?



TOP

Yes. HTML::Mason::ApacheHandler is compatible with the Apache::Filter chain.

If your application is initially configured like:

  PerlModule HTML::Mason::ApacheHandler
  <Directory /path/to/subdirectory>
    <FilesMatch "\.html$">
      SetHandler perl-script
      PerlHandler HTML::Mason::ApacheHandler
    </FilesMatch>
  </Directory>

you may wish to replace it with the following:

  PerlModule HTML::Mason::ApacheHandler
  PerlModule Apache::Dynagzip
  PerlModule Apache::CompressClientFixup
  <Directory /path/to/subdirectory>
    <FilesMatch "\.html$">
      SetHandler perl-script
      PerlHandler HTML::Mason::ApacheHandler Apache::Dynagzip
      PerlSetVar Filter On
      PerlFixupHandler Apache::CompressClientFixup
      PerlSetVar LightCompression On
    </FilesMatch>
  </Directory>

You should be all set safely after that.

In more common cases, you will need to replace the line:

    PerlHandler HTML::Mason::ApacheHandler

in your initial configuration file with the following lines:

    PerlHandler HTML::Mason::ApacheHandler Apache::Dynagzip
    PerlSetVar Filter On
    PerlFixupHandler Apache::CompressClientFixup

Optionally, you might add:

    PerlSetVar LightCompression On

to reduce the size of the stream for clients unable to speak gzip (like Microsoft Internet Explorer over HTTP/1.0).

Finally, make sure you have somewhere declared

  PerlModule Apache::Dynagzip
  PerlModule Apache::CompressClientFixup

This basic configuration uses many defaults. See Apache::Dynagzip POD for further fine tuning.



TOP

Is commercial support available for Apache::Dynagzip?



TOP

Yes. Slav Company, Ltd. provides commercial support for Apache::Dynagzip worldwide.

Since the author of Apache::Dynagzip is employed by Slav Company, service is effective and consistent.



TOP

Why is it important to maintain a control over the chunk size?



TOP

It helps to reduce response latency.

Apache::Dynagzip is the only handler to date that begins transmission of compressed data as soon as the initial uncompressed pieces of data arrive from their source, at a time when the source process may not even have completed generating the full document it is sending. Transmission can therefore take place concurrently with creation of later document content.

This feature is mainly beneficial for HTTP/1.1 requests, because HTTP/1.0 does not support chunks.

I would also mention that the internal buffer in Apache::Dynagzip always prevents Apache from the creating too short chunks over HTTP/1.1, or from transmitting too short pieces of data over HTTP/1.0.



TOP

Is it worthwhile to strip leading blank spaces prior to gzip compression?



TOP

Yes. It is usually worthwhile to do this.

The benefits of blank space stripping are mostly significant for non-gzipped data transmissions. One can expect some 5-20% reduction in stream size on regular 'structured' HTML, JavaScript, CSS, XML, etc., in this case at negligible cost in terms of CPU overhead and response delay.

After applying gzip compression, the benefits of previously applied blank space stripping are usually reduced to some 0.5-1.0% of the resulting size, because gzip compresses blank spaces very effectively. It is still worthwhile, however, to perform blank space stripping because:



TOP

Are there any content compression solutions for vanilla Apache 1.3?



TOP

Yes. There are two compression modules written in C that are available for vanilla Apache 1.3:

See their respective documentation for further details.



TOP

Can I compress the output of my site at the application level?



TOP

Yes, if your Web server is CGI/1.1 compatible and allows you to create specific HTTP headers from your application, or when you use an application framework that carries its own handler capable of compressing outbound data.

For example, vanilla Apache 1.3 is CGI/1.1 compatible. It allows development of CGI scripts/programs that can generate compressed outgoing streams accomplished with specific HTTP headers.

Alternatively, on mod_perl enabled Apache, some application environments carry their own compression code that can be activated through appropriate configuration:

Apache::ASP does this with the CompressGzip setting;

Apache::AxKit uses the AxGzipOutput setting to do this.

See the documentation for the particular packages for details.



TOP

Are there any content compression solutions for Apache-2?



TOP

Yes. A core compression module written in C, mod_deflate, is available for Apache-2.

mod_deflate for Apache-2 was written by Ian Holsman (USA).

Despite its name, mod_deflate for Apache-2 provides gzip-encoded content. In accordance with the concept of output filters that was introduced in Apache-2, mod_deflate is capable of gzipping outbound traffic from any content generator, including CGI, Java, mod_perl, etc.



TOP

When is Apache::Dynagzip supposed to be ported to Apache-2?



TOP

There are no current plans to port Apache::Dynagzip to Apache-2:

mod_deflate for Apache-2 is capable of providing all basic functionality required for effective dynamic content compression. The rest can be easily addressed through implementation of the accompanying specific, tiny filters. For instance, Apache::Clean, which is already ported to Apache-2, can be used to strip unnecessary blank spaces from outbound streams.



TOP

Where can I read the original descriptions of the gzip and deflate formats?



TOP

gzip format is published as rfc1952, and deflate format is published as rfc1951.

You can find many mirrors of RFC archives on the Internet. Try, for instance, my favorite at http://www.ietf.org/rfc.html



TOP

Are there any known compression problems with specific browsers?



TOP

Yes. Netscape 4 has problems with compressed cascading style sheets and JavaScript files.

You can use Apache::CompressClientFixup to disable compression for these files dynamically on Apache-1.3. Apache::Dynagzip is capable of providing so-called light compression for these files.

On Apache-2, mod_deflate can be configured to disable compression for these files dynamically, and the Apache::Clean filter can be used to strip unnecessary blank spaces.



TOP

Where can I find more information about the compression features of modern browsers?



TOP

Michael Schroepl maintains a highly valuable site

See it at http://www.schroepl.net/projekte/mod_gzip/browser.htm



TOP

Acknowledgments

During this work, I received a great deal of real help from Kevin Kiley, Igor Sysoev, Michel Schroepl, and Henrik Nordstrom. I'm thankful to all subscribers of mod_perl users mailing list, mod_gzip mailing list, and squid users mailing list for the questions and discussions regarding the content compression. I'm especially thankful to Stas Bekman for the initiative to publish this FAQ on mod_perl Web site. I highly value patient efforts of Dan Hansen in making this text better English...



TOP

Maintainers

The maintainer is the person you should contact with updates, corrections and patches.



TOP

Authors

Only the major authors are listed above. For contributors see the Changes file.






TOP
previous page: Workarounds for some known bugs in browsers.page up: Tutorialsno next page